Active Constituents:
Magnesium 0.45 % W/V
Calcium 0.75 % W/V
Sulphur 0.45 % W/V
Trace Elements present as salts of reduced monosaccharide complex and E.D.T.A.;
Iron 0.024 % W/V, Copper 0.017 % W/V
Manganese 0.017 % W/V, Zinc 0.006 % W/V
Boron 0.008 % W/V
Molybdenum 0.00023 % W/V
Main Features:
* A very effective mix of mineral nutrients and state-of-the-art organic chelates.
* Suitable for all growing media & hydroponic systems.
* Remarkably stable even in extreme climatic conditions.
* Capable of producing exceptionally rapid plant growth.
* Provides total availability of all nutrient requirements.
* Dual chelator - acid and alkaline.
* The fully chelated micro-nutrients are boosted to higher levels than other mixes.
* The concentrated formula provides high potency at low cost.
* Stunning results assured when used correctly.
* Manufactured in Australia.
INSTRUCTIONS:
Always use equal amounts of A and B. Never mix A and B in concentrated form.
Shake bottles before use.
To obtain a solution of 1,300 ppm (see below), add the required amount of Part A to water in your tank. Repeat for Part B. Then top up the tank to full volume. The use of a pH meter and a conductivity meter is recommended to ensure the maintenance of correct pH and strength.
1,300 ppm (parts per million) is equal to
1.857 mS/cm, or about equal to a cF (Conductivity Factor) of 19.
This strength is suitable for most purposes.
In general a pH (acidity/alkalinity) of 6.0 - 6.5 should be aimed for.
Tank/Litres |
Part A |
Part B |
10 |
50ml |
50ml |
50 |
250ml |
250ml |
100 |
500ml |
500ml |
200 |
1000ml |
1000ml |