Searles Buffalo Master Selective Weedkiller 2L Hose On

For the control of bindii, clover, oxalis and other weeds in buffalo (except ST varieties), couch and Qld blue couch domestic lawns.

If you want a perfect lawn free of one of the most nuisance weeds. Buffalo Master is the right product to the do the job.

Buffalo Master is a concentrated herbicide blend of 2 powerful and effective herbicides. Buffalo Master controls the weeds, the Bromoxynil acts quickly, and the MCPA provides residual control.

Controls various weeds including bindii, cape-weed, catsear, clover (not Tas.), creeping buttercup, cudweed, dandelion, fleabane, jo-jo (onehunga), oxalis, plantains, thistles.

Active constituents for concentrate:

200 g/L Bromoxynil present as the octanoic acid ester
200 g/L MCPA present as the butoxyethanol ester
Solvent: 343 g/L Liquid Hydrocarbons.

Active constituents for hose-on:

12 g/L Bromoxynil present as the octanoate ester
12 g/L MCPA present as the 2-ethylhexyl ester
Solvent: 20 g/L Liquid Hydrocarbons.

- 200ml bottle covers 300m2 on lawns
- 500ml bottle covers 750m2 on lawns
- 2-litre hose-on bottle treats 200 square metres.
- Suitable for bent, buffalo (except ST varieties), couch and Qld blue couch, fescue, Kikuyu, paspalum and rye lawns
- For a more effective application, add Spredmax when applying.
- Contains a measuring cap for convenient measuring.
- Excellent value for money.

- Available sizes: 200ml & 500ml & Hose-On form.

Note: SBC200 & SBC500 are unavailable. Please use Searles Buffalo Master as an alternative for lawns listed on the package.

DISCLAIMER: Please read and follow the instructions on the bottle of this product, even ahead of the instructions on the page which may be out of date or have errors.

How to Use:

• DO NOT spray if weeds are wilted by dry or cold weather.
• DO NOT spray if rain is likely within four hours. 
• DO NOT use on ST varieties of Buffalo Grass.

Situation:

Established Buffalo (except ST varieties) Couch, Bent, Kikuyu, Paspalum, Fescue, Rye Lawns and Turf.

Weeds Controlled:

Bindii (Jo-Jo), Catsear, Clover (Not TAS), Creeping Oxalis, Cudweed, Dandelion, Plantain, Thistles

Application Rate:

Contents (2L) treats 200 Sq.m.

How To Apply:

Apply evenly over the area to be treated. Do not mow turf for 2 days after treatment. Slight browning of grass may occur under hot conditions. More than one application may be required for dover control.

Caution: Dangerous to fish. DO NOT allow chemical containers or spray to get into drains, sewers, streams or ponds. Do NOT feed treats grass clippings to livestock. DO NOT allow spray to contact or drift into plants you do not want to kill.

DISCLAIMER: Please read and follow the instructions on the bottle of this product, even ahead of the instructions on the page which may be out of date or have errors.

General Instructions:

1. Measure the lawn area before application to ensure the correct dose rate is applied.
2. Shake the pack well before applying.
3. Remove the two-pinned plug from the top of the hose applicator (A)
4. Connect hose to the applicator (B) and turn on tap. (At this stage, only water will be sprayed.)
5. When ready to apply contents, place your finger over the small hole (C) on the side of the applicator. The tap water will mix with the mixture automatically in the correct ratio.
6. Walk and spray at a steady pace, whilst sweeping the spray in a back and forth arc. Overlap treated areas slightly.
7. To stop spraying mixture simple remove finger from hole (C).
8. One completion, insert two-pinned plug (A) to seal holes.

Weeds will die slowly and effects may take up to 3 weeks to appear.

DISCLAIMER: Please read and follow the instructions on the bottle of this product, even ahead of the instructions on the page which may be out of date or have errors.