Lawnporn Launch+ is a concentrated liquid lawn fertiliser with kelp for new lawn establishment, root development and recovery after stress or renovation. Suitable for all lawn varieties, including buffalo, couch, kikuyu and zoysia, it is available in 1L and 5L sizes.
The 8-10-5 formulation contains nitrogen, phosphorus and potassium, with added zinc and kelp concentrate. Apply during active growth, particularly at the start of the growing season or when establishing or repairing a lawn.
When to use Launch+
- During establishment of new turf or lawn seedlings.
- After lawn renovation or scarifying.
- When supporting recovery from lawn stress, wear or injury.
- During periods when additional root development is required.
Nutrient analysis
| Component | Analysis |
|---|---|
| Nitrogen (N), as urea | 8% |
| Phosphorus (P), as phosphite | 10% |
| Potassium (K), as carbonate | 5% |
| Zinc (Zn), as nitrate | 1% |
| Kelp concentrate | 5% |
Application rate and directions
Apply 50–100mL per 100 m² of lawn, diluted in 5–15L of water. Use the lower rate for the first application. Select a water volume that provides even coverage with your application equipment.
- Measure the lawn area to calculate the required amount of concentrate.
- Half-fill the spray tank with water.
- Shake the Launch+ container, then add the measured concentrate while stirring.
- Add the remaining water and mix thoroughly.
- Apply evenly to actively growing lawn foliage.
There is no need to water in after application. Avoid spraying concrete, stone and other hard surfaces, as staining may occur. Do not use spray equipment that has previously been used for herbicide.
Coverage by pack size
| Pack size | At 50mL per 100m² | At 100mL per 100m² |
|---|---|---|
| 1L | 2,000m² | 1,000m² |
| 5L | 10,000m² | 5,000m² |
Coverage figures represent the total area treated once. Repeat applications reduce the number of treatments available from each container.
Frequently asked questions
Can I use Launch+ on buffalo lawns?
Yes. Launch+ is suitable for all lawn varieties, including buffalo, couch, kikuyu and zoysia. Follow the recommended dilution and application rate.
How much Launch+ do I need for a 50m² lawn?
Use 25–50mL mixed with 2.5–7.5L of water to cover 50 m² evenly. For the first application, use 25mL of concentrate.
Disclaimer: Always read and follow the instructions on the product packaging before use, and don't rely on information on this page that may have errors or be outdated.